User's Manual

Avaya Branch Gateway Manager 10.0 Page 278
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
5.7.4 Short Codes
Short codes entered in this list can only be dialed by the user. They will override any matching user rights or system
short code. See Short Codes for details.
User and User Rights short codes are only applied to numbers dialed by that user. For example they are not applied to
calls forwarded via the user.
· WARNING
User dialing of emergency numbers must not be blocked by the addition of short codes. If short codes are added, the
users ability to dial emergency numbers must be tested and maintained.
Usability
· Mergeable: These settings are mergeable. Changes to these settings do not require a reboot of the system.
Configuration Settings
A symbol indicates that the setting can also be set and locked within a set of user rights with which the user is
associated using the Working Hour User Rights and Out of Hours User Rights settings. The user rights
applied can be controlled by a time profile selected as the user's Working Hours Time Profile setting. The effect
of the user rights can be displayed using the User Rights View control.
Short codes can be added and edited using the Add, Remove and Edit buttons. Alternatively you can right-click on the
list of existing short code to add and edit short codes.
· *FWD
Short codes of this form are inserted by the system. They are used in conjunction with the User | Forwarding
settings to remember previously used forwarding numbers. They can be accessed on that tab by using the drop-down
selector on the forwarding fields.
· *DCP
Short codes of this form are often inserted by the system. They are used by some phone types to contain settings
relating to functions such as ring volume and auto answer. Deleting such short codes will cause related phone settings
to return to their defaults.
· *DCP/Dial/8xxxxxxx, 0, 1, 1, 0/0
For system's with TCM phone ports, when a phone is first connected to the port, the button programming of the
associated user is overwritten with the default button programming appropriate for the phone model. Adding the
above short code prevents that behavior if not required, for example if a pre-built configuration including user
button programming is added to the system before the connection of phones.
425
389
271 271
369 271
271