User's Manual

Avaya Branch Gateway Manager 10.0 Page 267

15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway

Configuration Settings: Extension

5.6.5 IP DECT

This tab is displayed for IP DECT extensions. These are created manually after an IP DECT line has been added to the

configuration or added automatically as DECT handsets subscribe to the DECT system.

Usability

· Mergeable: These settings are not mergeable. Changes to these settings will require a reboot of the system.

Configuration Settings

· DECT Line ID

Use the drop-down list to select the IP DECT line from the system to the Avaya IP DECT system.

· Message Waiting Lamp Indication Type: Default = On

Allows selection of the message waiting indication to use with the IP DECT extension. Options are: None, On.

· Reserve Avaya IP Endpoint License:

Not used for B5800 Branch Gateway.

The additional fields below depend on whether the IP DECT line has Enable Provisioning selected.

· Enable Provisioning Not Selected

· Handset Type: Default = Unknown

Correct selection of the handset type allows application of appropriate settings for the handset display and

buttons. Selectable handset types are 3720, 3725, 3740, 3749 or Unknown.

· Enable Provisioning Selected

· IPEI: Default = 0

This field, if set to a value other than 0, sets the IPEI number of the handset that is able to subscribe to the

DECT R4 system using this extension number. The IPEI for each DECT handset is unique.

· Use Handset Configuration: Default = Off.

If Use Handset Configuration. is selected, the handset user is able to set the phone language and date/

time format. If not selected, those settings will be driven by the system or user locale settings in the system

configuration.

233