User's Manual

Avaya Branch Gateway Manager 10.0 Page 258
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
5.6.1 Extn
This tab contains settings applicable to most types of extension.
Usability
· Mergeable: These settings are not mergeable. Changes to these settings will require a reboot of the system.
Configuration Settings
· Extension ID
The physical ID of the extension port. Except for IP extensions, this settings is allocated by the system and is not
configurable.
· Base Extension: Range = 2 to 15 digits.
This is the directory number of the extension's default associated user.
· Following a restart, the system will attempt to log in the user with the same extension number. This does not occur
it that user is set to Force Login (User | Telephone ).
· If another user logs onto an extension, when they log out, the extension returns to its default associated user unless
they have logged in elsewhere or are set to Force Login.
· In the US, the Base Extension number is used for E911 calls. Any change to an extension's base extension must be
matched by changes to the E911 adjunct database, see E911 Overview . The extensions default associated user
should not be deleted.
· Extensions associated with IP phones should not be given extension numbers greater than 7 digits.
· Caller Display Type: Default = On.
Controls the presentation of caller display information for analog extensions, see Caller Display . For digital and IP
extensions, this value is fixed as On. The table below lists the supported options, all others are currently not used and
default to matching UK.
Type
Description
Off
Disables caller display.
On
Enables caller display using the caller display type appropriate to the System Locale, see Supported
Country and Locale Settings . If a different setting is required it can be selected from the list of
supported options. For an analog extension connected to a fax server or other device that requires the
pass through of DTMF tones, select DTMFF.
UK
FSK before the first ring conforming to BT SIN 227. Name and number.
UK20
As per UK but with a maximum length of 20 characters. Name and number.
DTMFA
Caller ID in the DTMF pattern A<caller ID>C. Number only.
DTMFB
Caller ID in DTMF after call connection. Number only.
DTMFC
Caller ID in the DTMF pattern A<caller ID>#. Number only.
DTMFF
Sends the called number in DTMF after call connection. Number only. Used for fax servers. When calls are
delivered via a hunt group it is recommended that hunt group queuing is not used. If hunt group queuing
is being used, set the Queue Type to Assign Call on Agent Alert.
DTMFD
Caller ID in the DTMF pattern D<caller ID>C. Number only.
FSKA
Variant of UK used for BT Relate 1100 phones. Name and number.
FSKB
ETSI specification with 0.25 second leading ring. Name and number.
FSKC
ETSI specification with 1.2 second leading ring. Name and number.
FSKD
Conforms to Belcore specification. Name and number.
· Reset Volume after Calls: Default = Off.
Resets the phone's handset volume after each call. This option is supported on Avaya 1400, 1600, 9500 and 9600
Series phones.
· Device Type
This field indicates, the last known type of phone connected to the extension port.
· Analogue extension ports always report as Analog Handset since the presence or absence of actual analog phone
cannot be detected.
· Digital extension ports report the type of digital phone connected or Unknown digital handset if no phone is
detected.
· H.323 extensions report the type of IP phone registered or Unknown H.323 handset if no phone is currently
registered as that extension.
281
421
730
796