User's Manual

Avaya Branch Gateway Manager 10.0 Page 250
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
5.4.11.7 SIP Credentials
It is used to enter the ITSP username and password for the SIP account with the ITSP. If you have several SIP accounts
going to the same ITSP IP address or domain name, you can enter up to 30 sets of ITSP account names and passwords
on this tab.
Usability
· Mergeable: These settings are mergeable. Changes to these settings do not require a reboot of the system.
Configuration Settings
Use the Add..., Edit... and Remove buttons to manage the set of credentials for the SIP trunk accounts. The settings for
each account are:
· Index
This number is assigned automatically and cannot be edited. If the From field on the SIP URI being used for
the call is set to Use Authentication Name , the registration field of the SIP URI will indicate the index number
of the SIP credentials to use for calls by that SIP URI.
· User Name
This name must be unique and is used to identify the trunk. The name can include the domain if necessary.
· Authentication Name: Default = Blank.
This field can be blank but must be completed if a Password is also specified. This value is provided by the SIP
ITSP. Depending on the settings on the Local URI tab associated with the SIP call, it may also be used as the user
part of the SIP URI. The name can include the domain if necessary.
· Contact: Default = Blank.
This field is used to enter a contact and can include the domain if necessary.
· Password: Default = Blank.
This value is provided by the SIP ITSP. If a password is specified, the matching Authentication Name must also
be set.
· Expiry: Default = 60 minutes.
This setting defines how often registration with the SIP ITSP is required following any previous registration.
· Registration Required: Default = On.
If selected, the fields above above are used for registration when making calls.
245