User's Manual

Avaya Branch Gateway Manager 10.0 Page 246
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
· PAI: Default = None.
You can enable P-Asserted-Identity (PAI) headers to assert the identity of users in outgoing SIP requests or response
messages. Use this setting to select the source of the user identity information or enter a value manually. The
selectable options are:
· None
When selected, the P-Preferred-Identity header is used instead of the P-Asserted-Identity, in order to ensure
compatibility with legacy networks.
· Use Credentials User Name
Use the User Name from the SIP Credentials record being used for the call.
· Use Internal Data
Use the SIP Name value from the User | SIP tab of the user making the call. The system can also use SIP URI
information configured for a hunt group (Hunt Group | SIP ) or for the voicemail (System | Voicemail ).
· Use Credentials Authentication Name
Use the Authentication Name from the SIP Credentials record being used for the call.
· Use Credentials Contact
Use the Contact information from the SIP Credentials record being used for the call.
· Registration: Default = Primary
This field is used to select from a list of the account credentials configured on the line's SIP Credentials tab.
· Incoming Group ID: Default = 0, Range 0 to 99999.
The Incoming Group ID to which a line belongs is used to match it to incoming call routes in the system configuration.
The matching incoming call route is then used to route incoming calls. The same ID can be used for multiple lines.
· Outgoing Group ID: Default = 0, Range 0 to 99999.
Short codes that specify a number to dial also specify the line group to be used. The system will then seize a line with
a matching Outgoing Group ID. The same ID can be used for multiple lines.
· Max Calls per Channel: Default =10
This field sets the maximum number of simultaneous calls that can use the URI before the system returns busy to any
further calls.
250
306
328 155
250
250