User's Manual

Avaya Branch Gateway Manager 10.0 Page 234
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
5.4.10.2 Gateway
This form is used to configure aspects of information exchange between the Avaya Branch Gateway and IP DECT
systems.
Usability
· Mergeable: These settings are not mergeable. Changes to these settings will require a reboot of the system.
Configuration Settings
· Auto-Create Extension: Default = Off.
If enabled, subscription of a handset with the DECT system causes the auto-creation of a matching numbered
extension within the system configuration if one does not already exist.
· Auto-Create User: Default = Off.
This option is only usable if Auto-Create Extension is also enabled. If enabled, subscription of a handset with the
DECT system causes the auto-creation of a matching user within the system configuration if one does not already
exist.
· Enable DHCP Support: Default = Off
Not supported on Avaya Branch Gateway systems.
· Enable Provisioning:
This option can be used with DECT R4 systems. It allows the setting of several values in the system configuration that
previously needed to be set separately in the master base stations configuration. For full details refer to the DECT R4
Installation manual. The use of provisioning requires the system security settings to include an IPDECT Group.
· SARI/PARK: Default = 0
Enter the PARK (Portable Access Rights Key) license key of the DECT R4 system. DECT handset users enter this
key when subscribing to the DECT system.
· Subscriptions: Default = Disabled
Select the method of subscription supported for handsets subscribing to the DECT R4 system.
· Disabled
Disables subscription of handsets.
· Auto-Create
Allow anonymous subscription of handsets. Once subscribed, the handset is assigned a temporary extension
number. That extension number can be confirmed by dialing *#. A new extension number can be specified by
dialing <Extension Number>*<Login Code>#. The Auto-Create Extension and Auto-Create User settings
above should also be enabled. While configured to this mode, Branch Gateway Manager will not allow the
manual addition of new IP DECT extensions.
· Preconfigured
Allow subscription only against existing IP DECT extensions records in the system configuration. The handset
IPEI number is used to match the subscribing handset to a system extension.
· Authentication Code: Default = Blank.
Set an authentication code that DECT handset users should enter when subscribing to the DECT system.