User's Manual

Avaya Branch Gateway Manager 10.0 Page 224
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
5.4.7.5 Call By Call
This tab is shown when the line Provider is set to AT&T. Settings in this tab are only used when calls are routed via a
channel which has its Service set to Call by Call.
It allows short codes to be created to route calls to a different services according to the number dialed. Call By Call
reduces the costs and maximizes the use of facilities. Call By Call chooses the optimal service for a particular call by
including the Bearer capability in the routing decision. This is particularly useful when there are limited resources.
Usability
· Mergeable: These settings are not mergeable. Changes to these settings will require a reboot of the system.
Configuration Settings
· Short Code:
The number which results from the application of the rules specified in the User or System Short code tables and the
Network Selection table to the number dialed by the user.
· Number:
The number to be dialed to line.
· Bearer: Default = Any
The type of channel required for the call (Voice, Data or Any).
· Service: Default = AT&T
The service required by the call (SDN (inc GSDN), MegaCom800, MegaCom, Inwats, Wats, Accunet, NLDS, I800
, ETN, Private Line, AT&T Multiquest).