User's Manual

Avaya Branch Gateway Manager 10.0 Page 204
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
5.4.3.2 Channels
This tab allows settings for individual channels within the trunk to be adjusted. To edit a channel either double-click on it
or click the channel and then select Edit.
To edit multiple channels at the same time, select the required channels using Ctrl or Shift and then click Edit. When
editing multiple channels, fields that must be unique such as Line Appearance ID are not shown.
Usability
· Mergeable: These settings are not mergeable. Changes to these settings will require a reboot of the system.
Configuration Settings
· Line Appearance ID: Default = Auto-assigned. Range = 2 to 9 digits.
Used for configuring Line Appearances with button programming. The line appearance ID must be unique and not
match any extension number. Line appearance is not supported for trunks set to QSIG operation and is not
recommended for trunks be used for DID.