User's Manual

Avaya Branch Gateway Manager 10.0 Page 174
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
5.3.7.2 HTTP
The system can use HTTP to import the directory records held by another system. Note that support for HTTP can be
disabled. The Avaya HTTP Clients Only setting (System | System ) can restrict a system from responding to
HTTP requests. The system's Unsecured Interface security settings also included controls for HTTP access (HTTP
Directory Read and HTTP Directory Write).
Usability
· Mergeable: These settings are mergeable. Changes to these settings do not require a reboot of the system.
Configuration Settings
· Directory Type: Default = None (No HTTP import).
Set whether HTTP import should be used and the method of importation.
· None
Do not use HTTP import.
· IP Office
Import from the system at the IP address set in the Source field.
· Source: Default = Blank.
The form of this field changes according to the Directory Type selection above. For IP Office this field requires the IP
address of the other system.
· List: Default = All
This field sets what types of directory record should be imported.
· All
Import the full set of directory records from the remote system.
· Config Only
Import just directory records that are part of the remote system's configuration. Note that these will be treated as
imported records and will not be added to the local systems own configuration records.
· LDAP Only
Import just directory records that the remote system has obtained as the result of its own LDAP import. This
allows LDAP directory records to be relayed from one system to another.
· HTTP Only
Import just directory records that the remote system has obtained as the result of its own HTTP import. This
allows HTTP directory records to be relayed from one system to another.
· URI: Default = /system/dir/complete_dir_list
This field is for information only and cannot be adjusted. The path shown changes to match the List setting above.
· Resync Interval (secs): Default = 3600 seconds.
Set how often the system should request an updated import. When a new import is received, all previously imported
records are discarded and the newly imported records are processed.
140 140
80