Manualshelf

User's Manual

ManualsBrandsAvaya ManualsGatewayAvaya B5800 Branch Gateway Manager
141142143144145146147148149150
Avaya Branch Gateway Manager 10.0 Page 144
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
ยท Favour RIP Routes over Static Routes: Default = Off
RIP can be enabled on the system LAN1 and LAN2 interfaces, and on specific Services . When this setting
is on, the RIP route to a destination overrides any static route to the same destination in the system's IP Routes ,
regardless of the RIP route's metric. The only exception is RIP routes with a metric of 16 which are always ignored.
Note: If a previously learnt RIP route fails, the system applies a metric of 16 five minutes after the failure. When off,
any RIP route to a destination for which a static route has been configured is ignored. This option is not supported on
Linux based systems.
377 145 153 336
376