User's Manual
Avaya Branch Gateway Manager 10.0 Page 140
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
5.3.1 System
Usability
Mergeable: These settings are mergeable. However, changes to Locale, License Server IP Address or Favor
RIP Routes over Static Routes require a reboot. These settings are mergeable. However, changes to Locale or
Favor RIP Routes over Static Routes require a reboot.
Configuration Settings
· Name: Default: = System MAC Address.
A name to identify this system. This is typically used to identify the configuration by the location or customer's
company name. Some features such as Gatekeeper require the system to have a name. Do not use <, >, |, \0, :, *, ?,
. or /.
· Contact Information: Default = Blank.
This field is only be edited by service user with administrator rights. If Contact Information is entered, it will set the
system under 'special control'.
· If the contact information is set using a standalone version of Branch Gateway Manager, warnings that "This
configuration is under special control" are given when the configuration is opened again. This can be used to warn
other users of Branch Gateway Manager that the system is being monitored for some specific reason and provide
them with contact details of the person doing that monitoring. See Loading a Configuration .
· Locale
This setting sets default telephony and language settings based on the selection. It also sets various external line
settings and so must be set correctly to ensure correct operation of the system. See Supported Country and Locale
Settings . For individual users the system settings can be overridden through their own locale setting (User | User
| Locale).
· When the system routes a call to the voicemail server it indicates the locale for which matching prompts
should be provided if available. The locale sent to the voicemail server by the system is determined as show
below. If the required set of prompts is not available, the voicemail will fallback to another appropriate
language and finally to English (refer to the appropriate voicemail installation manual for details).
· Short Code Locale: The short code locale, if set, is used if the call is routed to voicemail using the short
code.
· Incoming Call Route Locale: The incoming call route locale, if set, is used if caller is external.
· User Locale: The user locale, if set, is used if the caller is internal.
· System Locale: If no user or incoming call route locale is set, the system locale is used unless
overridden by a short code locale.
· Customize Locale Settings:
The Customize locale matches the Saudi Arabia locale but with the following additional controls shown below.
For other locales these are set through the System | Telephony | Tones and Music form.
· Tone Plan: Default = Tone Plan 1
The tone plan control tones and ringing patterns. The options are:
· Tone Plan 1: United States .
· Tone Plan 2: United Kingdom .
· Tone Plan 3: France .
· Tone Plan 4: Germany .
· Tone Plan 5: Spain .
· Busy Tone Detection: Default = Off.
Enables or disables the use of busy tone detection for call clearing. This is a system wide setting.
· CLI Type:
This field is used to set the CLI detection used for incoming analogue trunks. The options are DTMF, FSK V23 and
FSK BELL202.
· TFTP Server IP Address: Default = 0.0.0.0 (Broadcast).
For Avaya IP phones using the system for DHCP, the address set here is used when they make TFTP requests for
software and settings files.
· While running, Branch Gateway Manager can act as a TFTP server and provides files from its configured binaries
directory . Branch Gateway Manager can be disabled from doing TFTP through the Enable BootP and TFTP
Servers command.
45
796
837
163
847
846
815
817
840
101
100