User's Manual

Avaya Branch Gateway Manager 10.0 Page 14

15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway

1.2 Starting Branch Gateway Manager

No name or password is required to start Branch Gateway Manager. A name and password is only required when

connecting with a system.

When started, by default Branch Gateway Manager will attempt to discover any systems on the network. If it finds any it

will display a list from which you can select the system required.

1.Select Start and then Programs or All Programs depending on the version of Windows. Select the IP Office

program group.

2.Select Manager. If a Windows Security Alert appears select Unblock to allow Branch Gateway Manager to

run.

3.By default Branch Gateway Manager will scan the network for any systems. What appears next depends on

whether it finds any systems.

· If it finds multiple systems, it will display a list of those systems from which you can select the one whose

configuration you want to edit. If you want to open a configuration go to Opening a Configuration . If you

don't want to load a configuration click on Cancel.

· If it finds a single system, it will attempt to open the configuration of that system by displaying the user name

and password request. If you want to open a configuration go to Opening a Configuration . If you don't

want to load a configuration click on Cancel.

· If no systems are found or you cancel the steps above, the Branch Gateway Manager simplified view is

displayed.

4.Use the view to select the action you want to do.

· Create an Offline Configuration

· Open a Configuration from a System