User's Manual

Avaya Branch Gateway Manager 10.0 Page 130
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
4.4 Security Mode
These commands are available when the Branch Gateway Manager is in security configuration mode.
4.4.1 Open Security Settings
This command displays the Select B5800 menu to select and load a system's security settings. This requires entry of a
user name and password with rights to access security settings of the selected system.
This behavior changes when configuration settings have already be received from a system using a service user name
and password that also has security access rights for that system. In that case, the system's security settings are
automatically loaded without requiring name and password entry.
4.4.2 Close Security Settings
Close the currently open set of security settings received from a system without saving those settings.
4.4.3 Save Security Settings
Send edited security settings back to the system. Requires re-entry of a service user name and password with access
rights for security settings.
4.4.4 Reset Security Settings
Reset the security settings of the selected syste, to defaults. Requires entry of a service user name and password with
access rights for resetting the security settings. This option is not usable while a set of security configuration settings is
loaded.
The command File | Advanced | Erase Security Settings (Default) performs the same action from Branch
Gateway Manager configuration mode.
4.4.5 Preferences
See Preferences in the Menu Bar Commands | Configuration Mode | File Menu section.
4.4.6 Exit
This command closes Branch Gateway Manager.
4.4.7 Configuration
This command returns the Branch Gateway Manager application to configuration mode.
114
100