User's Manual

Avaya Branch Gateway Manager 10.0 Page 13
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Branch Gateway Manager: Installing Branch Gateway Manager
Installing Branch Gateway Manager
Note: This installation process will install Windows .NET2 if not already present. The installation of .NET2 may require
some systems to restart and the installation process to then be restarted.
1.If installing from the Admin DVD, insert the DVD and when the page is displayed click on the link for the Admin
suite. This will open a file windows showing the installation files for the suite. Locate and double-click on the
setup.exe file.
2.Select the language you want to use for the installation process. This does not affect the language used by Branch
Gateway Manager when it is run. Click Next >.
3.If an upgrade menu appears, it indicates that a previous installation has been detected. Select Yes to upgrade the
existing installed applications.
4.If required select the destination to which the applications should be installed. We recommend that you accept the
default destination. Click Next >.
5.The next screen is used to select which applications in the suite should be installed. Clicking on each will display a
description of the application. Click on the next to each application to change the installation selection. When
you have selected the installations required, click Next >.
6.The applications selected are now ready to be installed. Click Next >.
7.Following installation, you will be prompted whether you want to run Branch Gateway Manager. Selecting Yes runs
Branch Gateway Manager.
8.On some versions of Windows, you may be required to restart the PC. Allow this to happen if required.