User's Manual

Avaya Branch Gateway Manager 10.0 Page 127
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Menu Bar Commands: Configuration Mode: Tools Menu
4.3.5 MSN/DID Configuration
This menu can be used to populate the Incoming Call Route table with a range of MSN or DID numbers.
In the example above, the customer has ten DID numbers starting at 01505392201 with the central office exchange
passing through 3 digits for each. Having selected the number of presentation digits (3), set the range (10) and selected
the first destination (201); clicking Add created the ten incoming call routes (201 to 210).
· MSN/DID
The first number in the set of MSN numbers for which you have subscribed. Note: If you require to find an exact match
between the MSN numbers and the destination numbers, enter a minus (-) sign before the first MSN number.
· Destination
Where incoming calls with matching digits should be routed. The drop-down list contains the extensions and groups on
the system.
· Line Group ID
Specifies the incoming line group ID of the trunks to which the DID routing is applied.
· Presentation Digits
Set to match the number of digits from the MSN/DID number that the central office exchange will actually present to
the system.
· Range
How many MSN or DID number routes to create in sequence using the selected MSN/DID and Destination as start
points. Only routing to user extensions is supported when creating a range of records.
· Add
Adds the appropriate records to the Incoming Call Route table using the value entered above.
· Delete
Removes a specific record.