User's Manual

Avaya Branch Gateway Manager 10.0 Page 126
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
4.3 Configuration Mode: Tools Menu
4.3.1 Export | User
During a Avaya Branch Gateway R6.1 to R6.2 upgrade, users are not automatically created in System Manager. Before
an R6.1 to R6.2 upgrade, Avaya Branch Gateway users must be exported to a file and then the file must be imported to
System Manager. This feature allows you to export all users or selected users from a loaded configuration to an XML file
that is then imported in System Manager. The default filename is <SystemName>_Users.xml.
· User Name – select this checkbox to export all users.
· User Name/Extension – select the appropriate checkboxes to export those users.
4.3.2 Extension Renumber
This command allows the extension numbering of user extensions to be changed. The existing extension number range to
be adjusted can be specified followed by the new start point for the range after renumbering.
The command does not alter the extension number used for hunt groups but does adjust the extension numbers of hunt
group members.
4.3.3 Line Renumber
On external trunks Line appearance ID numbers can be assigned to each channel supported in order to allow that channel
or line to be associated with a Line Appearance button on phones that support button programming. By default all lines
are automatically numbered from 701 upwards when added to the system. This command allows the lines to be
renumbered from a different starting point.
4.3.4 Busy on Held Validation
Busy on Held is a user feature where, when the user has a call on hold, the system indicate the user as being busy to
any further calls.
The use of Busy on Held in conjunction with multiple call appearance buttons is deprecated. This command can be used
to identify those users who have multiple call appearance buttons and for whom Busy on Held is currently set.
When run, it shows a list of the users affected and if selected their Busy on Held setting will be switched off.