User's Manual

Avaya Branch Gateway Manager 10.0 Page 124
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
4.2 Configuration Mode: View Menu
4.2.1 Toolbars
This command allows selection of which toolbars should be shown or hidden in configuration mode. A tick mark is
displayed next to the name of those toolbars that are currently shown.
4.2.2 Tooltip
This setting control whether additional tooltips are displayed when Branch Gateway Manager is running in simplified view
mode.
4.2.3 Navigation Pane
This command shows or hides the Navigation Pane. A tick mark appears next to the command when the pane is shown.
4.2.4 Group Pane
This command shows or hides the Group Pane. A tick mark appears next to the command when the pane is shown.
4.2.5 Details Pane
This command set the location of the Details Pane when the Group Pane is also shown. The Details Pane can be placed
either below or to the right of the Group Pane.
4.2.6 Error Pane
This command shows or hides the Error Pane. A tick mark appears next to the command when the pane is shown.
4.2.7 Advance View
This command causes Branch Gateway Manager to switch from its simplified view to advanced view mode. Branch
Gateway Manager automatically switches to advanced view mode if an B5800 Branch Gateway configuration is loaded.
4.2.8 Hide Admin Tasks
Not used for B5800 Branch Gateway.
4.2.9 Simplified View
If Branch Gateway Manager has no configuration loaded, this command switches it from advanced view to simplified
view.
124