User's Manual

Avaya Branch Gateway Manager 10.0 Page 121

15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway

Menu Bar Commands: Configuration Mode: File Menu

4.1.8.16 Memory Card Command

These commands are used with the memory cards installed in IP Office Aura Edition control units.

4.1.8.16.1 Shutdown

This command can be used to shutdown operation of IP Office Aura Edition memory cards.

This action or a system shutdown must be performed before a memory card is removed from the unit. Removing a

memory card while the system is running may cause file corruption. Card services can be restarted by either reinserting

the card or using the Start Up command.

Shutting down the memory card will disable all services provided by the card including Embedded Voicemail if being

used.

4.1.8.16.2 Start Up

This command can be used to restart operation of an IP Office Aura Edition memory card that has been shut down .

The command will start the Select B5800 discovery process for selection of the system.

4.1.9 Backup/Restore

4.1.9.1 Backup Binaries and Configuration

This command copies all configuration files (.cfg) and software binary files (.bin) stored in Branch Gateway Manager's

working directory to a selected folder.

4.1.9.2 Restore Binaries and Configuration

This command copies all configuration files (.cfg) and software files (.bin) stored in a selected folder to the Branch

Gateway Manager's working directory.

107

121