User's Manual

Avaya Branch Gateway Manager 10.0 Page 116
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
4.1.8.11 Recreate IP Office SD Card
This command can be used with the System SD cards used by IP500 V2 control units. It allows Branch Gateway Manager
to copy all the files and folders used by a system when starting onto the card that has been place into the card slot of the
PC running Branch Gateway Manager. It updates the card with the version of those files installed with the Branch
Gateway Manager application. It includes the binary files for the system, external expansion modules and phones. The
command also copies all language prompt sets used by Embedded Voicemail.
If the card contains dynamic system files such as SMDR records, they are temporarily backed up by Branch Gateway
Manager and then restored after the card is recreated. For the card to be used in a system's System SD slot the card
must be Avaya SD Feature Key card. The card must be correctly formatted (see Format IP Office SD card ), however a
reformat of an existing working card is not necessary before using recreate to update the card contents.
· The source for the files copied to the SD card are the sub-folders of the \Memory Cards folder under Branch
Gateway Manager's Working Directory (normally C:\Program Files Avaya\IP Office\Manager).
However, if the Working Directory is changed to a location without an appropriate set of \Memory Cards sub-
folders, the required set of files will not be copied onto the SD card.
· ! Warning
Do not re-purpose a B5800 Branch Gateway SD card for use with any other IP Office mode. Doing so may damage
the SD card and make it unusable for your B5800 Branch Gateway system.
1.Note: This process can take up to 20 minutes depending on the PC. Once started, the process should not be
interrupted.
2.Insert the SD card into a reader slot on the Branch Gateway Manager computer.
3.Using Branch Gateway Manager, select File | Advanced | Recreate IP Office SD Card.
4.Select the type of system for which the card is intended. This selection will affect how the system operates when
defaulted with this card present in its System SD card slot.
· IP Office A-Law
A system fitted with this type of card will default to A-Law telephony. The system will default to IP Office Basic
Edition - Quick Mode PBX System operation.
· IP Office U-Law
A system fitted with this type of card will default to U-Law telephony. The system will default to IP Office Basic
Edition - Quick Mode Key System operation.
· IP Office Partner Edition
A system fitted with this type of card will default to A-Law telephony and IP Office Basic Edition - PARTNER®
Mode operation.
· IP Office Norstar Edition
A system fitted with this type of card will default to U-Law telephony and IP Office Basic Edition - Norstar
Mode operation.
· B5800 Branch Gateway
Use this option for an SD card intended to be used with an IP Office system running in B5800 Branch Gateway
mode. There is a separate SD card for Avaya Branch Gateway. The B5800 Branch Gateway SD card can only
be used for Avaya Branch Gateway operation and cannot be used to change modes to IP Office. You also
cannot use or change an IP Office SD card for use with an B5800 Branch Gateway system.
· ! Warning
Do not re-purpose a B5800 Branch Gateway card for use with any other IP Office mode. Doing so may
damage the SD card and make it unusable for your B5800 Branch Gateway system.
5.Browse to the card location and click OK.
6.Branch Gateway Manager will prompt whether you want to include Avaya IP Office Web Manager files as part of
the recreate process.
· For systems that will be running in IP Office Basic Edition - Quick Mode mode, these files are necessary if you
want to use IP Office Web Manager to configure the system.
· For all systems, these files are necessary if you want to go through the process of on-boarding registration.
7.Branch Gateway Manager will start creating folders on the SD card and copying the required files into those
folders.
8.Do not remove the card until the process is completed and Branch Gateway Manager displays a message that the
process has been completed.
115
101