User's Manual

Avaya Branch Gateway Manager 10.0 Page 114

15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway

4.1.8.7 Security Settings

This command is used to switch the Branch Gateway Manager application to security mode. In that mode, Branch

Gateway Manager is used to edit the security settings of a system.

4.1.8.8 Erase Security Settings (Default)

This command returns the security settings of a system back to their default values. This action does not affect the

system's configuration or audit trail record. When this command is used, the Select B5800 menu is displayed. Once a

system is selected, a valid security user name and password are required to complete the action.

· The system's security settings are returned to their defaults as indicated in the Security Mode chapter.

· Note that any security certificates stored and being used by the system are deleted. Any services currently using

those certificates are disconnected and disabled until the appropriate certificates are added back to the system's

security configuration. That includes SSL VPN connections being used to perform system maintenance.

The name and password required to use this command are those used for security configuration access.

4.1.8.9 Embedded File Management

For control units with a memory card installed, the contents of the card can be viewed using Branch Gateway Manager.

This view can also be used to add and remove files from the card. This may be useful when the memory card is being

used to store Music on Hold or IP phone firmware files.

For Linux based systems, the folder /opt/ipoffice are used as the file repository for embedded file management actions.

For further details refer to Embedded File Management .

131