User's Manual

Avaya Branch Gateway Manager 10.0 Page 112
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
4.1.8.6 Audit Trail
The audit trail lists the last 16 actions performed on the system from which the configuration loaded into Branch Gateway
Manager was received. It includes actions by service users such as getting the configuration, sending a configuration
back, reboots, upgrades and default the system.
Audit trail events can be output to a Syslog server through the system's System | System Events settings.
The last failed action is always recorded and shown in red. It is kept even if there have been 16 subsequent successful
actions.
· The Audit Trail is part of the system configuration file received from the system. If the configuration is kept open
between send and reboot operations (ie. if Close Configuration/Security Setting After Send is not
selected), the Audit Trail will not show details of those operations. It will only show details of those operations if
the configuration is closed and then a new copy of the configuration is received from the system.
· Audit Details
When a specific access event is selected from the list, the following information is shown in the Audit Details
section:
· The Security User shows the service user name used for the access action.
· The Data and Time of Access indicate the local system time when the recorded event occurred.
· The PC Login is the computer name of the PC used for the access.
· The PC IP Address and PC MAC Address are the IP address and MAC address of the PC used for access.
· The Access Type details the type of action that was performed.
· The Outcome shows the system's response to the access. The outcome Success (Warning) refers to the
sending of a configuration that contains fields marked as errors or warnings by Branch Gateway Manager's
validation function. Success (Clean) refers to the sending of a configuration that does not contain any
validation errors or warnings.
· Items Changed
The Items Changed area summarizes the changes contained in a sent configuration. Where changes to a single
record of a particular type are made, the Item Name field lists the individual record changed. Where changes are
made to several records of the same type, the Item Name field displays Multiple items.
104