User's Manual

Avaya Branch Gateway Manager 10.0 Page 110
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
· Restart IP Phones
For Branch Gateway Manager 8.1 and higher the Restart IP Phones option can be used. This will cause those
phone to load any upgrade phone firmware included in the system upgrade (if using the system's memory card as
their firmware file source).
Searching for Particular Systems
The default address used by the Upgrade Wizard is the address shown in the Branch Gateway Manager title bar, which is
selected through File | Preferences . If the unit required is not found, the address used can be changed.
1.Enter or select the required address in the Unit/Broadcast Address field.
2.Click Refresh to perform a new search.
Changing the .bin File Directory Used
The directory in which the Upgrade Wizard looks for .bin files is set through Branch Gateway Manager's Binary Directory
setting. This can be changed using Files | Change Working Directory or File | Preferences | Directories . It
can also be changed directly from the Upgrade Wizard as follows.
1.Right-click on the list area.
2.Select Select Directory.
3.Browse to and highlight the folder containing the .bin files. Click OK.
4.The list in the Available column will be updated to show the .bin files in the selected directory that match units or
modules listed.
102
98 101