User's Manual

Avaya Branch Gateway Manager 10.0 Page 108

15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway

· When shutdown, the LEDs shown on the system are as follows. Do not remove power from the system or

remove any of the memory cards until the system is in this state:

· LED1 on each IP500 base card installed will also flash red rapidly plus LED 9 if a trunk daughter card

is fitted to the base card.

· The CPU LED on the rear of the system will flash red rapidly.

· The System SD and Optional SD memory card LEDs on the rear of the system are extinguished.

· To restart a system when shutdown indefinitely, or to restart a system before the timed restart, switch power

to the system off and on again.

1.Once you have selected the system from the Select B5800 menu, the System Shutdown Mode menu is

displayed.

2.Select the type of shutdown required:

· If a Timed shutdown is selected, the system will reboot after the set time has elapsed.

· If Indefinite is used, the system can only be restarted by having its power switched off and then on again.

For Linux based telephone systems, the telephony service must be restarted through the server's web control

pages.