User's Manual

Avaya Branch Gateway Manager 10.0 Page 106
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
4.1.6.6 Validation
This tab is accessed through File | Preferences and then selecting the Validation sub-tab.
By default Branch Gateway Manager validates the whole configuration when it is loaded and individual fields whenever
they are edited. This tab allows selection of when automatic validation should be applied to configuration files loaded into
Branch Gateway Manager.
· Validate configuration on open
Automatically validate configuration files when they are opened in Branch Gateway Manager.
· Validate configuration on edit
Validate the whole configuration when OK is clicked after editing a record. For large configurations, disabling
this option removes the delay caused by validating the configuration after every edit.
· Prompt for configuration validation on save or send
If selected, when saving or sending a configuration, a prompt is displayed asking whether the configuration
should be validated. If validation is selected and error are found, the send or save process is canceled. This
option is disabled if Validate configuration on edit is selected.
4.1.7 Offline
4.1.7.1 Create New Config
This command should not be used with B5800 Branch Gateway. The Branch Gateway Manager simplified view is used to
create an offline configuration for an B5800 Branch Gateway system. The same action is performed by the icon in
the Main Toolbar.
4.1.7.2 Open File
This command allows a configuration file stored on PC to be opened in Branch Gateway Manager.
4.1.7.3 Send Config
This command is used to send an offline configuration to a system.
· ! WARNING
After this command is completed, the system is rebooted. This will end all calls and services in progress.
4.1.7.4 Receive Config
This command displays the Select B5800 menu used to receive a systems configuration settings. See Loading a
Configuration .
Once the configuration has been received, you are prompted to save it on the PC.
51
45