User's Manual

Avaya Branch Gateway Manager 10.0 Page 101

15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway

Menu Bar Commands: Configuration Mode: File Menu

4.1.6.2 Directories

This tab is accessed through File | Preferences and then selecting the Directories sub-tab.

These fields set the default location where Branch Gateway Manager will look for and save files. This tab is also accessed

by the File | Change Working Directory command.

· Working Directory (.cfg files)

Sets the directory into which Branch Gateway Manager saves .cfg files. By default this is the Branch Gateway

Manager application's program directory.

· This folder location is also used for the Recreate IP Office SD Card command. It uses sub-folders of

the \Memory Cards folder at the specified locations. If the Working Directory is changed to a location

without an appropriate set of \Memory Cards sub-folders, the required set of files will not be copied onto the

SD card.

· Binary Directory (.bin files)

Sets the directory in which the Branch Gateway Manager upgrade wizard, HTTP, TFTP and BOOTP functions look

for firmware files requested by phones and other hardware components. That includes .bin file, .scr files and .txt

files. By default this is the Branch Gateway Manager application's program directory.

· Note that in the Upgrade Wizard , right-clicking and selecting Change Directory also changes this setting.

· Known Units File

Sets the file and directory into which Branch Gateway Manager can record details of the systems it has discovered.

Once a file location has been specified, a Known Units button becomes available on the discovery menu used

for loading system configuration. Pressing that button displays the known units file as a list from which the

required system can be selected. It also allows sorting of the list and records to be removed.

116

109