Configuration manual

Revision history
Issue Date Summary of changes
2 07/2012
• The name of the B5800 Branch Gateway security certificate cannot
contain spaces. This is explained in a note in the appropriate
places.
• The order of the steps in the “Configuration checklist” have been
changed. The step to add the B5800 Branch Gateway to System
Manager has been moved to after you generate a certificate and run
the Initial Installation Utility.
• Two additional fields may need to be edited in the xml file used to
export users during an R6.1 to R6.2 upgrade. Those fields have been
added to the procedure “Editing the xml file containing the users.”
3 10/2012 Modifications have been made to the following procedures:
• “Generating a certificate on System Manager” (Additional steps have
been added to the procedure for clarity.)
• “Using the Initial Installation Utility” (It is recommended to select LAN1
to configure the WAN interface.)
• “Configuring the B5800 Branch Gateway for certificates” (This
procedure replaces “Manually loading the certificate to the B5800
Branch Gateway.)
• “Adding distributed users to System Manager” (Distributed H.323
users and SIP users do not require different configuration when being
added to System Manager.)
Revision history
Implementing the Avaya B5800 Branch Gateway for an Avaya Aura
®
Configuration October 2012 33