Configuration manual

Note:
Release 6.2 does not support VMPro.
Standalone Voice Mail provides additional port capacity (40 ports) provided on a Linux
server. You must have a Linux server installed to use this option.
• Endpoints — support for the following new native phones (operating in distributed branch
user model): 3740/3749 DECT R4; 3810 (digital wireless); 9504, 9508 (digital); 9611G;
B149, B159 and B179 conference phones (former Konftel); 1120E, 1140E, 1220, 1230
(SIP); The following BCM digital phones: DECT handsets 4xxx/7xxx series, T7316E,
T7316, T7406E, T7406, T7208, T7100, T7000, M7310, M7310N, M7310+BLF, M7324,
M7324N, M7208, M7208N, M7100, M7100N, ACU (audio conference unit)
• Contact Center — support for Contact Center service interoperability. IP Agent or Avaya
one-X
®
Agent in branch in Telecommuter mode with CC-Elite; calls transferred from
B5800 Branch Gateway to contact center; B5800 Branch Gateway handling VoicePortal
transfer with UUI in SIP.
• Park and Page — support for the Park and Page feature when the system voicemail type
is configured as Embedded Voicemail or Standalone Voice Mail. Park and Page is also
supported on systems where Avaya Aura Messaging, Modular Messaging over SIP, or
CallPilot is configured as the central voicemail system and the local Embedded Voicemail
provides auto attendant operation. The Park and Page feature allows a call to be parked
while a page is made to a hunt group or extension.
• Additional new features:
- Enable voicemail instructions using DTMF — support for enhanced voicemail
continuity over the PSTN. Available for Avaya Aura Messaging or Modular
Messaging over SIP central voicemail systems, this feature facilitates getting the call
to the specific mailbox rather than to the general prompt. When a PSTN number is
configured, B5800 Branch Gateway will send voicemail calls to that PSTN number
when Avaya Aura Session Manager is not available.
Note:
In Release 6.2, this feature is not available for CallPilot.
- Export user tool — for an R6.1 to R6.2 upgrade, support for exporting all users or
selected users from a loaded configuration to an XML file that is then imported in
Avaya Aura System Manager. During a B5800 Branch Gateway R6.1 to R6.2
upgrade, users are not automatically created in System Manager. After an R6.1 to
R6.2 upgrade, B5800 Branch Gateway users are exported to a file and then the file
is imported to System Manager.
- Music on Hold — administrator is able to change the Music on Hold. Supported
audio file formats are PCM or WAW.
B5800 Branch Gateway overview
30 Implementing the Avaya B5800 Branch Gateway for an Avaya Aura
®
Configuration October 2012
Comments? [e-mail]