Configuration manual

• Email will not flow through the B5800 Branch Gateway in this example. See optional
section for port 25.
• An off-site DHCP server is used to supply IP addresses to phones and PCs. Otherwise,
add ports 67 and 68 in optional sections.
• The B5800 Branch Gateway IP address will be manually configured and not need a DHCP
server.
• TFTP service begins using port 69, but eventually uses the source ports from both
sides.
• Ports 80804 and 80812 are unsecure communications but have optional port 80805 and
80813 as secure options.
• For B5800 Branch Gateway R6.1, the TFTP/UDP port selection is an issue; IP Office
Manager, ENM, and SysMonitor do not constrain the selection of TFTP/UDP source
port.
B5800 Branch Gateway R6.2 improves this TFTP port issue greatly in a number of ways:
- System Manager does not use TFTP.
- SysMonitor and IP Office Manager have configurable TFTP/UDP port ranges.
• HTTPS is used for DECT R4 administration.
Avaya port matrix for B5800 Branch Gateway and SIP phones
284 Implementing the Avaya B5800 Branch Gateway for an Avaya Aura
®
Configuration October 2012
Comments? [e-mail]