Configuration manual

10. In the VoiceMail Ports field, use the up and down arrows to set the number of
licensed voicemail ports.
Note:
You can set a number in this field only if you selected one of the two voicemail
options in the Use embedded for AA and Announcements drop-down box.
Avaya Aura Messaging requires SIP Trunk Session configuration and uses SIP
Trunk Sessions licenses.
11. Accept the default setting (on, that is check box is checked) for Enable Voicemail
Instructions Using DTMF.
12. Click OK.
13. Select File > Save Configuration.
The Send Configuration window appears and the Configuration Reboot Mode is set
to Immediate. Do not change the reboot mode.
Configuring B5800 Branch Gateway to use Modular
Messaging over SIP for voicemail
About this task
The B5800 Branch Gateway system can be configured to use Modular Messaging as its
voicemail server.
Note:
If Modular Messaging over SIP is used as the central voicemail system, you are able to still
use the local Embedded Voicemail or Standalone Voice Mail for auto attendant operation
and for announcements to waiting calls.
Procedure
1. From the System Manager console, select the B5800 Branch Gateway device and
click Edit to edit the system configuration for the device. IP Office Manager will be
launched on your PC. For more information, see
Editing a B5800 Branch Gateway
system configuration from System Manager on page 157.
2. In the left navigation pane, click System.
3. Click the Voicemail tab.
4. In the Voicemail Type drop-down box, select Modular Messaging over SIP.
Note:
Fields applicable to this mode of voicemail support remain enabled.
Voicemail configuration
178 Implementing the Avaya B5800 Branch Gateway for an Avaya Aura
®
Configuration October 2012
Comments? [e-mail]