Configuration manual

iii. In the Retry timeout field, use the up and down arrows to set the
amount of time to elapse before the page is repeated. The time is
set in 15–second increments.
b. To configure Centrex Transfer for this DTMF breakout, select Centrex Transfer
and then enter the transfer number in the Transfer Number field.
c. To configure an extension number for this DTMF breakout, select the
appropriate extension number from the Reception/Breakout (DTMF 0) drop-
down box.
Note:
You can also enter an external number in this field.
10. For the Breakout (DTMF 2) drop-down box, repeat step 9.
11. For the Breakout (DTMF 3) drop-down box, repeat step 9.
12. In the SIP Name field, enter the appropriate name.
13. In the SIP Display Name (Alias) field, enter the appropriate name.
14. In the Contact field, enter the appropriate name.
15. Configure the Anonymous check box as appropriate. This feature is enabled when
this check box is selected.
Note:
For more information about the fields in the SIP Settings section, see the IP Office
Manager on-line help.
Configuring Standalone Voice Mail
About this task
The B5800 Branch Gateway system can be configured to use Standalone Voice Mail.
Standalone Voice Mail provides additional port capacity provided on a Linux server. Before
you perform this procedure, Standalone Voice Mail must be installed and configured on the
Linux server. The Standalone Voice Mail server and required Linux operating system
components are provided on the IP Office Applications DVD. For more information, see
Implementing Standalone Voice Mail for the Avaya B5800 Branch Gateway, document number
18-604088.
Procedure
1. From the System Manager console, select the B5800 Branch Gateway device and
click Edit to edit the system configuration for the device. IP Office Manager will be
launched on your PC. For more information, see
Editing a B5800 Branch Gateway
system configuration from System Manager on page 157.
Voicemail configuration
174 Implementing the Avaya B5800 Branch Gateway for an Avaya Aura
®
Configuration October 2012
Comments? [e-mail]