Configuration manual

Changes made to users and extensions in this way will not be synced back to System
Manager.
For more information about the two management methods, that is, central management
from System Manager or local management from IP Office Manager, see
Management on
page 14. Do not use both of these management methods to configure and manage users
and extensions on a B5800 Branch Gateway system.
System Manager does not support the configuration of User Rights on B5800 Branch Gateway
systems. Similar functionality of applying selected user settings to groups of users is available
from the System Manager user template capability.
About disabling the System Manager administration feature
for a B5800 Branch Gateway
If the B5800 Branch Gateway is centrally managed by System Manager and you want to
administer the B5800 Branch Gateway using IP Office Manager that is directly connected to
the branch, for example to install an individual PLDS license file, you must first disable the
System Manager administration feature for the branch. Disabling the System Manager
administration feature for a branch can be performed from System Manager or from IP Office
Manager if the network connection to System Manager is not available.
After you disable the System Manager administration feature for a branch and administer the
branch using IP Office Manager, you must synchronize the B5800 Branch Gateway with
System Manager to synchronize the changes and return the System Manager administration
feature for the branch to the enabled state. You can also manually enable the System Manager
administration feature for a branch using either of the procedures listed below and clicking the
check box for Under SMGR Administration to enable the feature.
To disable the System Manager administration feature for a branch, see one of the following:
•
Disabling the System Manager administration feature for the branch from System
Manager on page 160
• Disabling the System Manager administration feature for the branch from IP Office
Manager on page 160
To synchronize the B5800 Branch Gateway with System Manager, see
Synchronizing B5800
Branch Gateway with System Manager on page 162. Some configuration changes cannot be
synced with System Manager. See Configuration changes performed through Manager that
cannot be synced with System Manager on page 162 for more information.
About disabling the System Manager administration feature for a B5800 Branch Gateway
Implementing the Avaya B5800 Branch Gateway for an Avaya Aura
®
Configuration October 2012 159