Configuration manual

Manager to launch IP Office Manager on page 112 for the procedure to install the
B5800AdminLite.exe file on the System Manager server.
Note:
If this is the first time you are attempting to edit a B5800 Branch Gateway device
through System Manager from this PC, and IP Office Manager has not yet been
installed on this PC, the following message appears:
B5800 Branch Gateway Manager not installed.
Avaya B5800 Branch Gateway Manager is not installed on this machine. To
complete the current task, you must download and install Avaya B5800
Branch Gateway Manager. After you complete this installation restart the
machine. Refer to the Release Notes/Online help.
Do you want to download Avaya B5800 Branch Gateway Manager from the
server now?
If you receive this message, click Yes. Then go to step 4 in
Installing IP Office
Manager from the System Manager server to a PC on page 114 for the procedure
to install IP Office Manager on the PC.
Restrictions when editing a B5800 Branch Gateway system
configuration from System Manager
When you edit the system configuration of a B5800 Branch Gateway device that is managed
from System Manager, IP Office Manager is launched in system mode. The following
restrictions apply when editing a B5800 Branch Gateway system configuration from System
Manager with IP Office Manager in system mode.
• Extension is visible in the Extn tab only but is disabled.
• All users (other than NoUser and RemoteManager) are visible in the User tab only but
are disabled.
• NoUser has User and Source Number tabs visable and editable. The rest of the tab is
not visable and therefore not editable.
• RemoteManager has the User tab visable and editable. The rest of the tab is not visable
and therefore not editable.
The User Management feature available in System Manager is used to manage users and
extensions on B5800 Branch Gateway systems that are centrally managed from System
Manager. See
User administration on page 185 for more information.
Note:
Do not use IP Office Manager that is connected directly to the B5800 Branch Gateway device
to edit users and extensions on systems that are centrally managed from System Manager.
Managing B5800 Branch Gateways from System Manager
158 Implementing the Avaya B5800 Branch Gateway for an Avaya Aura
®
Configuration October 2012
Comments? [e-mail]