Configuration manual

The Send Configuration window appears and the Configuration Reboot Mode is set
to Immediate. Do not change the reboot mode.
Automatic codec preference settings
Setting Selected
Preference
2nd Preference 3rd Preference 4th Preference
G.729 G729(a) 8K CS-
ACELP
G711 U-Law
64K
G711 A-Law
64K
G723.1 6K3 MP-
MLQ
G.723 G723.1 6K3 MP-
MLQ
G729(a) 8K CS-
ACELP
G711 U-Law
64K
G711 A-Law
64K
G.711 U-Law G711 U-Law
64K
G711 A-Law
64K
G729(a) 8K CS-
ACELP
G723.1 6K3 MP-
MLQ
G.711 A-Law G711 A-Law
64K
G711 U-Law
64K
G729(a) 8K CS-
ACELP
G723.1 6K3 MP-
MLQ
G.722 64K codec is also supported on systems with IP500 VCM or IP500 Combo cards. By
default, the G.722 64K codec is not used.
Changing the maximum SIP sessions
About this task
The Maximum SIP Sessions setting determines the number of concurrent sessions allowed
across all SIP trunks (SM line and public SIP trunks). Setting Maximum SIP Sessions to a
specific value requires a corresponding quantity of B5800 Branch Gateway SIP Trunk Session
licenses. If B5800 Branch Gateway cannot obtain the required license quantity then the
configuration change will be rejected. If the required license quantity cannot be obtained or
renewed for an already-configured value of Maximum SIP Sessions, then the B5800 Branch
Gateway will be in License Error mode, or in License Restricted mode if the 30-day grace
period has expired. The license error can be resolved either by making a sufficient quantity of
SIP Trunk Session licenses available, or by reducing the configured Maximum SIP Sessions
setting to a value for which sufficient license quantity is available. Regardless of the license
mode, the number of concurrent SIP sessions allowed in system operation is determined by
the Maximum SIP Sessions setting.
Procedure
1. From the System Manager console, select the B5800 Branch Gateway device and
click Edit to edit the system configuration for the device. IP Office Manager will be
launched on your PC. For more information, see
Editing a B5800 Branch Gateway
system configuration from System Manager on page 157.
Initial branch configuration
144 Implementing the Avaya B5800 Branch Gateway for an Avaya Aura
®
Configuration October 2012
Comments? [e-mail]