Configuration manual

# Description Section
20 Add a second Session Manager line
for redundancy.
See Avaya Aura Session Manager line
redundancy on page 150.
21 Set up outgoing call routing.
• See Setting up outgoing call routing on
page 151.
• For information on routing back to the
branch for fallback alternate routes, see
Branch PSTN call routing examples on
page 289.
22 Configure the type of voicemail
system the branch will use.
See Voicemail options on page 171.
23 Enable branch SIP extension
support.
See Enabling branch SIP extension
support on page 154.
Note:
Steps 24 through 31 are performed to configure Avaya Aura
®
Session
Manager.
24 View a list of the SIP domains. See Viewing the SIP domains on
page 166.
25 Create a location. See Creating locations on page 166.
26 Create a digit adaptation. See Creating adaptations on page 167.
27 Create a SIP entity. See Creating SIP entities on page 167.
28 Create an entity link. See Creating entity links on page 168.
29 Create a time range. See Creating time ranges on page 169.
30 Create a routing policy. See Creating routing policies on
page 169.
31 Create a dial pattern. See Creating dial patterns on page 170.
32 Add distributed users. This task is
performed from Avaya Aura
®
System
Manager using the User
Management feature.
See User administration on page 185.
Setting up System Manager to launch IP Office Manager
About this task
From the administration PC, you can use the full version of IP Office Manager available on the
B5800 Branch Gateway Administrator Applications DVD or IP Office Manager Lite that is
provided in the B5800AdminLite.exe file to view and edit a B5800 Branch Gateway system
Initial branch configuration
112 Implementing the Avaya B5800 Branch Gateway for an Avaya Aura
®
Configuration October 2012
Comments? [e-mail]