Configuration manual

# Description Section
9 Uploading an auto attendant audio
file. (Optional)
See Uploading an auto attendant audio
file on page 132.
10 Apply the system template to one or
more branches. (Optional)
See Applying the system template on
page 132.
11 Create an endpoint template. See Creating an endpoint template on
page 133.
Note:
You must create a B5800 Branch
Gateway endpoint template. You cannot
add a user in System Manager unless an
endpoint template has been created.
Note:
• Steps 12 through 23 are performed to modify a B5800 Branch Gateway
configuration as needed.
• Steps 24 through 12 are performed to configure Avaya Aura
®
Session
Manager.
• Step 32 is performed to configure B5800 Branch Gateway users from User
Management within System Manager.
12 Disable unused trunks. See Disabling unused trunks on
page 134.
13 Set a trunk clock quality setting. See Setting a trunk clock quality setting on
page 136.
14 Set trunk prefixes. See Setting the trunk prefixes on
page 137.
15 Enable SIP trunk support. See Enabling SIP trunk support on
page 139.
16 Set the branch prefix and local
number length for the extension
numbering.
See Setting the branch prefix and local
number length for extension numbering on
page 140.
17 Change the default codec selection. See Changing the default codec
selection on page 143.
18 Change the maximum SIP sessions. See Changing the maximum SIP
sessions on page 144.
19 Add a Session Manager line. See Adding an Avaya Aura Session
Manager line on page 145.
This procedure includes the steps to
configure TLS transport for the Session
Manager line.
Configuration checklist
Implementing the Avaya B5800 Branch Gateway for an Avaya Aura
®
Configuration October 2012 111