Configuration manual

Chapter 8: Initial branch configuration
This chapter provides initial configuration tasks required for each B5800 Branch Gateway deployed in the
distributed branch user model.
Configuration checklist
Use this checklist to monitor your progress as you configure a B5800 Branch Gateway system
deployed as a distributed branch.
# Description Section
1 Confirm that your version of Avaya
Aura
®
System Manager is R6.2 and
SP1 has been installed.
2 Download IP Office Manager onto
the System Manager server.
See Setting up System Manager to launch
IP Office Manager on page 112.
Note:
This task is not required if you have
downloaded the B5800AdminLite.exe
file using the Upgrade Management link
in System Manager.
3 Install the shared PLDS license file
on the System Manager WebLM
server.
See Installing the shared PLDS license file
on the System Manager WebLM server on
page 117.
Note:
If you are using the individual licensing
method, see Using Manager to deliver
license files to the branches on
page 117.
Note:
Steps 1 through 3 only need to be performed one time. They do not need to be
performed for each new B5800 Branch Gateway.
4 Generate a certificate on Avaya
Aura
®
System Manager.
See Generating a certificate on System
Manager on page 119.
Implementing the Avaya B5800 Branch Gateway for an Avaya Aura
®
Configuration October 2012 109