Configuration manual

Chapter 7: Upgrading an R6.2 system with
an R6.2 service pack
This chapter is for B5800 Branch Gateway systems that have already been upgraded from R6.1 to R6.2.
Avaya periodically releases service packs to provide updates that fix existing problems or provide
enhancements.
This chapter describes how to perform an upgrade using Avaya Aura
®
System Manager. Avaya Aura
®
System Manager should be used on R6.2 systems when multiple branches require upgrades.
Two other methods which require using IP Office Manager that is connected directly to the B5800 Branch
Gateway system are available to perform an upgrade. You can perform an upgrade using the IP Office
Manager upgrade wizard or using the System SD card. For more information, see:
•
Using the upgrade wizard on page 219
• System upgrade using the System SD card on page 258
R6.2 service pack installation checklist
#
Description Section
1 Create a backup of the system
configuration.
See Creating a backup of the system
configuration using System Manager on
page 217.
2 Synchronize the B5800 Branch
Gateway with System Manager.
See Synchronizing B5800 Branch Gateway
with System Manager on page 164.
3 Set up an external server to act as
a remote software library.
See Remote Software Library for B5800
Branch Gateway upgrades on page 96.
4 Get the inventory. See Getting inventory on page 98.
5 Configure PLDS access. See Configuring user PLDS access on
page 99.
6 Create a software library. See Creating a software library on
page 100.
7 Upgrade the B5800 Branch
Gateway.
See Upgrading the B5800 Branch Gateway
using System Manager on page 101.
Implementing B5800 Branch Gateway for a CS 1000 Configuration October 2012 95