Configuration manual

Appendix G: 1100 Series and 1200 Series IP
Deskphones
The 1100 Series and 1200 Series SIP 4.3 deskphones are supported on B5800 Branch Gateway using
the SIP protocol. When used with BCM systems, the phones use the UNIStim protocol. Because of the
different protocols, the user interface can be slightly different when the phones are used with B5800
Branch Gateway.
The following features are supported on B5800 Branch Gateway:
• Standard phone features like hold, transfer, conference
• Multiple call appearances (bridged appearances and trunk-line appearances are not supported)
• Message waiting support
• Busy lamp keys with speed-dial, status indication, and pickup of ringing calls
• Application support — the telephones can be used in combination with applications.
• Self labeling Feature keys — allows access to selected B5800 Branch Gateway features using a
single key-press. If additional parameters are needed, the user is guided using a dialog interface of
feature request plus softkeys.
• Feature key — The supported features are also available pressing a feature key (or soft key) plus
the appropriate feature code. The feature codes are identical to the features codes from BCM,
therefore making transition easy.
• Ease of installation — the telephones can be managed from IP Office Manager and are easily
installed. B5800 Branch Gateway serves as DHCP server and can provide configuration files,
software updates, etc. To install the telephones, only IP Office Manager is required.
• Easy migration from BCM to B5800 Branch Gateway — when migrating telephones from BCM to
B5800 Branch Gateway, when B5800 Branch Gateway DHCP server is used, the system installs and
upgrades the telephones to the correct software for B5800 Branch Gateway. This makes migration
easy and quick.
The SIP 4.3 firmware provides the following enhancements:
• Pressing the Send key in order for the phone to start dialing is no longer required (1-10 sec timeout,
default = 5 sec).
• Language selection via IP Office Manager is supported.
For more information about the 1100 Series and 1200 Series SIP phones, see:
Implementing B5800 Branch Gateway for a CS 1000 Configuration October 2012 313