Configuration manual

# Dest.
Port
Network
/App
Protocol
En
or
Dis
?
Default
Port
State
Remote
Device
Ext to
Branch
?
Description
7 514 UDP/
Syslog-
Cli
Yes Open Syslog
Server
No, but
could be
Log files transmitted
from IP phones to
server.
8 5005-C RTCP Yes Open NMS Yes RTCP collector (HP-
Openview, AIM, etc.).
9 5060 TCP/SIP No Open Yes SIP signaling.
10 49152 –
53247-C
UDP/
RTP-
RTCP
Yes Open IP Phones,
RTCP
Collector
Yes Dynamically allocated
ports used during VoIP
calls for RTP and RTCP
traffic. The port range
can be adjusted
through the System >
Gatekeeper tab.
11 50794 UDP/
TCP/
Monitor
No Open Manager Yes Event, trace and
diagnostic outputs.
OPTIONAL
E-1 25 TCP/
SMTP
Yes Open Mail Server Depend
s
E-2 37 UDP/
Time
Yes Closed Manager Yes TIME (RFC868)
Service supported by
Manager and VMPro.
Requested by B5800
Branch Gateway. This
service is an option to
NTP – port 123.
E-3 67 UDP/
DHCP-
Srv
Yes IP Clients No DHCP service to IP
phones, PCs and other
clients.
E-4 1720 TCP/
H323
Yes Open H323
Server
No Offering H.323 service
to IP phones.
E-5 5061 TCP/
TLS
Yes Closed Session
Manager
Yes Encrypted SIP
signaling.
For a description of the column headings, see Table column heading definitions on
page 285.
Avaya port matrix for B5800 Branch Gateway and SIP phones
284 Implementing B5800 Branch Gateway for a CS 1000 Configuration October 2012
Comments? [e-mail]