Configuration manual

Backing up the primary folder using a system phone
About this task
A user configured as a system phone user can perform this procedure using a 1400, 1600, or
9600 Series phone (excluding XX01, XX02 and XX03 models). The user's login code is used
to restrict access to system administration functions on the phone.
Procedure
1. Select Features > Phone User > System Admin.
2. Enter your B5800 Branch Gateway user login code.
3. From the menu select Memory Card.
4. Select System Backup.
The contents of the primary folder on the System SD card are copied to the backup
folder. This process takes approximately 6 minutes.
About restoring from the backup folder
When you restore from the backup folder, you copy the contents of the backup folder on the
System SD card to the primary folder on the System SD card. Files with matching file names
are replaced.
Warning:
This procedure will cause the B5800 Branch Gateway system to be restarted, disconnecting
any current calls and services in progress.
Restoring from the backup folder using Manager
Procedure
1. Start Manager.
2. Select File > Embedded File Management.
3. From the Select IP Office window, select the appropriate system.
The file contents of the memory cards are displayed.
4. Select File > Restore System Files.
The contents of the backup folder on the System SD card are copied to the primary
folder on the System SD card. The process takes approximately 6 minutes. When
SD card management
252 Implementing B5800 Branch Gateway for a CS 1000 Configuration October 2012
Comments? [e-mail]