Configuration manual

HP OpenView Network Node Manager
Procedure
1. Copy the following MIB files to the application's MIB folder.
MIB File Source
rfc2737-entity-mib.mib snmp_mibs\standard folder on
OpenView Install CD.
avayagen-mib.mib \AdminCD\snmp_mibs\IPOffice folder
on B5800 Branch Gateway Admin
DVD.
ipo-prod-mib.mib \AdminCD\snmp_mibs\IPOffice folder
on B5800 Branch Gateway Admin
DVD.
ipo-mib.mib \AdminCD\snmp_mibs\IPOffice folder
on B5800 Branch Gateway Admin
DVD.
inet-address-mib.mib \AdminCD\snmp_mibs\Standard folder
on B5800 Branch Gateway Admin
DVD.
rfc2213-integrated-services-mib.mib \AdminCD\snmp_mibs\standard folder
on OpenView Install CD.
diffserv-dscp-tc.mib \AdminCD\snmp_mibs\Standard folder
on B5800 Branch Gateway Admin
DVD.
diffserv-mib-hpov.mib \AdminCD\snmp_mibs\Standard folder
on B5800 Branch Gateway Admin
DVD.
ipo-phones-mib.mib \AdminCD\snmp_mibs\IPOffice folder
on B5800 Branch Gateway Admin
DVD.
2. Start the OpenView Network Node Manager console.
3. Select Options and then Load/Unload MIBs: SNMP.
4. Select Load and select all the MIB files listed above.
5. Select Compile.
Additional system procedures
228 Implementing B5800 Branch Gateway for a CS 1000 Configuration October 2012
Comments? [e-mail]