Configuration manual

Chapter 13: User administration
This chapter provides the procedures to add distributed users to B5800 Branch Gateway and Avaya Aura
®
System Manager.
Adding distributed users to System Manager
About this task
When you add a distributed user to System Manager, you must configure a B5800 Branch
Gateway Profile on System Manager.
Procedure
1. On the System Manager console, under Users, click User Management.
2. In the left navigation pane, click Manage Users.
3. On the User Management page, click New.
4. On the New User Profile page, in the Identity section, do the following:
a. In the Last Name field, enter the user's last name.
Note:
Depending on how the branches and stations in your system are named and
organized, you could enter a location name in this field, for example Chicago
25. Then in the next field, First Name, you could enter a location within that
branch, for example cashier.
b. In the First Name field, enter the user's first name.
c. In the Middle Name field, enter the user's middle name.
d. In the Description field, enter a description of this user profile.
e. In the Login Name field, enter the extension user login in the format,
[e-mail] or [e-mail]. For example,
[e-mail] or [e-mail].
For survivability mode operation with a B5800 Branch Gateway system, the
user name without the domain name should match the user name configured
in the branch system.
f. In the Authentication Type drop-down box, accept the default setting,
Basic.
g. In the Password field, enter the password required to log into System Manager
for personal web configuration.
Implementing B5800 Branch Gateway for a CS 1000 Configuration October 2012 187