Configuration manual

Note:
The Enable Voicemail Instructions Using DTMF check box and associated
Call Pilot PSTN Number field are disabled in R6.2. B5800 Branch Gateway does
not access the CallPilot system over the PSTN when the Session Manager line
is down.
11. Click OK.
12. Select File > Save Configuration.
The Send Configuration window appears and the Configuration Reboot Mode is set
to Immediate. Do not change the reboot mode.
Configuring CallPilot and CS 1000 to send MWI in a SIP NOTIFY
message to the user
About this task
To configure CallPilot and CS 1000 to send Message Waiting Indication (MWI) in a SIP NOTIFY
message to the B5800 Branch Gateway user, the configuration described below must be
performed. For more information, see CS 1000 System and CallPilot Server Configuration,
document number NN44200–312.
Procedure
1. Configure B5800 Branch Gateway as a satellite site on CallPilot.
2. Enable MWI DN and Message waiting indication options for the B5800 Branch
Gateway user on CallPilot.
3. Configure DCH on CS 1000 with RCAP MWI as follows:
ADAN DCH 11
CTYP DCIP
DES VTRK
USR ISLD
ISLM 4000
SSRC 3700
OTBF 32
NASA YES
IFC SL1
CNEG 1
RLS ID 25
RCAP ND2 MWI TAT
MBGA NO
H323
OVLR NO
OVLS NO
Configuring B5800 Branch Gateway to use CallPilot for voicemail
Implementing B5800 Branch Gateway for a CS 1000 Configuration October 2012 181