Configuration manual

announcements to waiting calls. Note that for this configuration, Embedded Voicemail
licenses are required.
• CallPilot — The B5800 Branch Gateway system can be configured to use CallPilot as
its voicemail server when Session Manager is used as the core SIP router. See
Configuring B5800 Branch Gateway to use CallPilot for voicemail on page 179 for more
information. When CallPilot is used as the central voicemail system, at each branch you
have the option to still use the local Embedded Voicemail or Standalone Voice Mail for
auto attendant operation and for announcements to waiting calls. Note that for this
configuration, Embedded Voicemail licenses are required.
For more information about licensing, see
Licensing on page 16.
Configuring Embedded Voicemail
About this task
Embedded Voicemail is the default voicemail configuration for B5800 Branch Gateway.
Procedure
1. From the System Manager console, select the B5800 Branch Gateway device and
click Edit to edit the system configuration for the device. IP Office Manager will be
launched on your PC. For more information, see
Editing a B5800 Branch Gateway
system configuration from System Manager on page 159.
2. In the left navigation pane, click System.
3. Click the Voicemail tab.
4. In the Voicemail Type drop-down box, select Embedded Voicemail.
Note:
Fields applicable to this mode of voicemail support are enabled. If the field is not
applicable, the field is disabled.
5. If you want the users to be presented with a display menu for access to their mailbox,
check the Messages Button Goes to Visual Voice check box. For more
information, see the IP Office Manager on-line help.
6. In the Minimum Password Length field, use the up and down arrows to set the
appropriate minimum password length.
7. In the Maximum Record Time field, use the up and down arrows to set the
maximum record time in seconds for recorded announcement and auto attendant
prompts. messages and prompts.
8. In the VoiceMail ports field, use the up and down arrows to set the number of
voicemail ports. This field must match the number of voicemail ports that are
licensed for the system.
Voicemail configuration
174 Implementing B5800 Branch Gateway for a CS 1000 Configuration October 2012
Comments? [e-mail]