Configuration manual

must first disable System Administration for the branch and then enable System Administration
for the branch after you make your configuration changes. Then you must synchronize those
changes with System Manager.
There are some configuration changes that cannot be synchronized with System Manager.
Those tasks should not be performed locally through IP Office Manager for branches that are
centrally managed by System Manager. Configuration changes that cannot be synchronized
and therefore should not be performed locally are:
• adding users or extensions
• editing user core attributes (that is, name, number, password, or extension number)
• changing any of the following security configuration settings:
- SMGRB5800Admin user settings
- SCEP settings
- certificates settings
- Web services settings
Also note that the User Rights feature is not integrated with System Manager. The User Rights
feature is available only in the local IP Office Manager and is intended only for B5800 Branch
Gateways that are not configured to be managed centrally through System Manager.
Synchronizing B5800 Branch Gateway with System Manager
Implementing B5800 Branch Gateway for a CS 1000 Configuration October 2012 165