Configuration manual

3. In the Preferences tab, click the Set Simplified View as default check box to de-
select this option.
4. Click OK.
5. Close IP Office Manager.
6. See Disabling the System Manager administration feature for the branch from
System Manager on page 162.
Synchronizing B5800 Branch Gateway with System
Manager
About this task
Some configuration changes cannot be synced with System Manager. See Restrictions when
editing a B5800 Branch Gateway system configuration from System Manager on page 160 for
more information.
Procedure
1. On the System Manager console, under Elements, click Inventory.
2. In the left navigation pane, click Synchronization > B5800 Branch Gateway.
3. Click the check box for the B5800 Branch Gateway system whose configuration you
want to sync with System Manager.
4. Do one of the following:
• Click System Configuration to sync only system configuration data with
System Manager.
• Click User to sync only user data with System Manager.
• Click System Configuration and Users to sync system configuration and
user data with System Manager.
5. Do one of the following:
a. Click Now to run the synchronization job now.
b. Click Schedule to run the synchronization job at a scheduled date and time.
Configuration changes performed through Manager that cannot be
synced with System Manager
You are able to disable System Manager administration for a B5800 Branch Gateway and
configure the B5800 Branch Gateway device locally through IP Office Manager. To do this, you
Managing B5800 Branch Gateways from System Manager
164 Implementing B5800 Branch Gateway for a CS 1000 Configuration October 2012
Comments? [e-mail]