Configuration manual

3. Click the New icon and select Short Code.
4. Configure the settings as appropriate. See Short Code tab field descriptions on
page 154 for more information.
Note:
To view more information about the system short codes, press F1. In particular,
see the description of the Dial short code.
5. Click OK.
6. Select File > Save Configuration.
Short Code tab field descriptions
Name
Description
Code Enter the number dialed by users that should
be matched to this short code. Use X
wildcards for any single digit.
Feature Leave this field set as Dial.
Telephone Number Set this field to match a number that should
be passed to the Avaya Aura
®
Session
Manager for routing against its dialing
pattern matches. The N wildcard can be used
to match any wildcards in the Code.
Note:
Add SS to the entry in this field to have the
caller ID passed to the Session Manager
line. For example, if you are entering 8N
in the Telephone Number field, enter
8NSS.
Line Group Id Set the Line Group ID to match the
Outgoing Group settings used in the SM
lines URI setting.
Initial branch configuration
154 Implementing B5800 Branch Gateway for a CS 1000 Configuration October 2012
Comments? [e-mail]