Configuration manual

9. In the DTMF Support field, do the following:
• If CallPilot is configured as the voicemail system, accept the default setting,
RFC2833.
• If users will call into the Meeting Exchange conferencing server, select either
RFC2833 or Inband. Meeting Exchange does not support digit exchange
through out-of band (that is, Info) signaling.
10. Configure the remaining fields as appropriate. See
VoIP tab field descriptions on
page 149 for more information.
11. Click OK.
12. Select File > Save Configuration.
The Send Configuration window appears and the Configuration Reboot Mode is set
to Immediate. Do not change the reboot mode.
Session Manager tab field descriptions
Name Description
Line Number This value is automatically assigned by
B5800 Branch Gateway and should be
unique for each line added to the
configuration.
In Service The default setting is enabled. This option
can be used to manually take the Session
Manager line out of service. It does not reflect
or set the actual state of the line.
SM Domain Name This name should match a SIP domain
defined in the Session Manager system's
SIP Domains table. Unless there are reasons
to do otherwise, all the B5800 Branch
Gateway systems in the CS 1000 network
can share the same domain.
Note:
See Viewing the SIP domains on
page 168 for a list of SIP domains defined
in Session Manager.
SM Address Enter the IP address of the Session Manager
or NRS that the line should use in the CS
1000 network. The same Session Manager
or NRS should be used for the matching
Entity Link entry in the CS 1000
configuration.
Administering a Session Manager line for each branch
Implementing B5800 Branch Gateway for a CS 1000 Configuration October 2012 147