Configuration manual

c. Click the Encryption tab.
d. Click the View Certificates button.
e. In the Certificate Management window, click the Your Certificates tab.
17. From your Firefox browser, to save the certificate in the X.509 PEM format, do the
following:
a. In the Certificate Management window, click the View button.
b. In the Certificate Viewer window, click the Details tab.
c. Click Export.
d. In the Save Certificate to File window, in the Filename field, change the file
name suffix to .cer. The .cer format is required for B5800 Branch Gateway.
e. Click Save.
18. If you are not going to use the Initial Installation Utility, go to
Configuring the B5800
Branch Gateway for certificates on page 124.
Using the Initial Installation Utility
About this task
The B5800 Branch Gateway Initial Installation utility provides a default configuration and
security settings that minimize initial installation activities and maximize security. The system
must be configured with the default settings before the system can be administered by Avaya
Aura
®
System Manager. This utility is used to enable System Manager administration of the
B5800 Branch Gateway.
Note:
For new installations, use the Initial Installation Utility before the control unit is connected to
the network. See Connecting the control unit to the network on page 88 for more information.
The Initial Installation Utility can be used to administer the control unit on site or while the
B5800 Branch Gateway control unit is being staged off site.
This procedure includes the steps to manually launch the Initial Installation utility. When a new
B5800 Branch Gateway is detected, the Initial Installation utility is launched automatically, so
you would begin with Step 3.
Procedure
1. Start Manager and connect to the B5800 Branch Gateway system.
2. Select File > Advanced > Launch Initial Installation Utility.
3. In the System Name field, enter the appropriate system name.
4. For the WAN Interface, select LAN1 to connect to the enterprise network.
Using the Initial Installation Utility
Implementing B5800 Branch Gateway for a CS 1000 Configuration October 2012 121