Configuration manual

# Description Section
This procedure includes the steps to
configure TLS transport for the Session
Manager line.
21 Add a second Session Manager line
for redundancy.
See Avaya Aura Session Manager line
redundancy on page 152.
22 Set up outgoing call routing.
• See Setting up outgoing call routing on
page 153.
• For information on routing back to the
branch for fallback alternate routes, see
Branch PSTN call routing examples on
page 291.
23 Configure the type of voicemail
system the branch will use.
See Voicemail options on page 173.
24 Enable branch SIP extension
support.
See Enabling branch SIP extension
support.
Note:
Steps 25 through 32 are performed to configure Avaya Aura
®
Session
Manager.
25 View a list of the SIP domains. See Viewing the SIP domains on
page 168.
26 Create a location. See Creating locations on page 168.
27 Create a digit adaptation. See Creating adaptations on page 169.
28 Create a SIP entity. See Creating SIP entities on page 169.
29 Create an entity link. See Creating entity links on page 170.
30 Create a time range. See Creating time ranges on page 171.
31 Create a routing policy. See Creating routing policies on
page 171.
32 Create a dial pattern. See Creating dial patterns on page 172.
33 Add distributed users. These tasks
are performed from Avaya Aura
®
System Manager using the User
Management feature.
See User administration on page 187.
Initial branch configuration
110 Implementing B5800 Branch Gateway for a CS 1000 Configuration October 2012
Comments? [e-mail]